Rentals, Sales, & Parts Supplied Across the US & Canada
Delivering the Solutions You Need
We offer comprehensive new unit sales, rental-purchase options, used equipment, rentals, parts, consumables, services, and support throughout the entire United States and Canada. For industry-leading brands delivering outstanding performance and reliability, contact us today!
Rental Equipment
Darda C20C
Most practical for open excavations & trenching. Requires a laborer on the ground.
Normal / Long Wedgeset Options
3" x 30" / 36" Minimum Depth Holes
Self Greasing
Integrated Pressure Booster (7,250PSI)
7 - 27GPM @ 2,500 - 3,500 PSI
Requires 2-Way Flow Circuit
6 - 40 Ton Carriers
1,650 / 1,950 Tons Splitting Force
Typical Projects: 250 - 5,000 CY / Splitter
Darda C20J
Tunnelling or 1-man operation.
Normal / Long Wedgeset Options
3" x 30" / 36" Minimum Depth Holes
Self Greasing
Integrated Pressure Booster (7,250PSI)
7 - 27GPM @ 2,500 - 3,500 PSI
Requires 2-Way Flow Circuit
Best Suited 9 - 15 Ton Carriers
1,650 / 1,950 Tons Splitting Force
Typical Projects: 250 - 5,000 CY / Splitter
Darda C20V
Open excavations / surface work.
Normal / Long Wedgeset Options
3" x 30" / 36" Minimum Depth Holes
Self Greasing
Integrated Pressure Booster (7,250PSI)
7 - 27GPM @ 2,500 - 3,500 PSI
Requires 2-Way Flow Circuit
Best Suited 9 - 15 Ton Carriers
1,650 / 1,950 Tons Splitting Force
Typical Projects: 250 - 5,000 CY / Splitter
Darda C12
Normal, Long, Short Wedgeset Options
1-3/4" x 22" / 27" Minimum Depth Holes
75# Typical Operating Weight
7,250 PSI Operating Pressure
Runs Off NRCDES Hydraulic Power Units
Typical Use of 1-3 Cylinders Per HPU
350 to 450 Tons Splitting Force
Typical Projects: 2-500 CY
Darda C9
Normal / Long Wedgeset Options
1-3/4" x 17" / 23" Minimum Depth Holes
50# Typical Operating Weight
7,250 PSI Operating Pressure
Runs Off NRCDES Hydraulic Power Units
Typical Use of 1-2 Cylinders Per HPU
220 Tons Splitting Force
Darda C2S
1-1/4" x 11" Minimum Depth Holes
38# Typical Operating Weight
7,250 PSI Operating Pressure
Runs Off NRCDES Hydraulic Power Units
Typical Use of 1 Cylinder Per HPU
210 Tons Splitting Force
Hydraulic Power Units
Air, Gas, or Electric Power Heads
Change between power heads in minutes
Roll Cage or Base Models Available
Standard 30FT Supply & Return Hoses
7,250 PSI Operating Pressure
5-Gallon Reservoir
External Dump Valve; Easy to Adjust
Robust Design; Extreme Longevity of Pump
Delivers 71 Cubic Inches / Minute at 7,000 PSI
Accessories
We supply all consumables and spare parts for all the product lines we carry!
Contact our office for support, consumables, & spare parts!
Demolition Attachments
Have a need to rent a demolition attachment? Simply contact our office to discuss feasibility of a specialized rental for your project.
Hydraulic Drills
Fully Hydraulic Models
For C12s & C20s
WORD Base Unit
Doofor Hydraulic Drifters
Custom Improvements & Systems
Installation, Training, & Support
185+ CFM Compressor Required
Carriers Typically 35,000lb +
Hydraulic / Pneumatic Drills
Hydraulic With Pneumatic Percussion
For C12s & C20s
WORD Base Unit
Wolf-Produced VL120 Drifter
Custom Improvements & Systems
Installation, Training, & Support
375+ CFM Compressor Required
Carriers Typically 18,000lb +
Fully Pneumatic Drills
Custom fully pneumatic solutions for light drilling work.
RPO & Used Equipment
Solutions That Fit Your Budget
We offer Rental-Purchase Options as well as used equipment in various configurations. Contact our office for details on used equipment!
New Equipment Sales
Darda Hydraulic Rock & Concrete Splitters
Darda C20B
Chain, Vertical, Joint Mounting Options
Normal / Long Wedgeset Options
3" x 30" / 36" Minimum Depth Holes
Self Greasing
Integrated Pressure Booster (7,250PSI)
7 - 27GPM @ 2,500 - 3,500 PSI
Requires 2-Way Flow Circuit
6 - 40 Ton Carriers
1,650 / 1,950 Tons Splitting Force
Typical Projects: 250 - 5,000 CY / Splitter
Construction Excavation / Heavy Trenching / Dimensional Stone / Boulder Reduction
Darda C12
Normal, Long, Short Wedgeset Options
1-3/4" x 22" / 27" Minimum Depth Holes
75# Typical Operating Weight
7,250 PSI Operating Pressure
Runs Off NRCDES Hydraulic Power Units
Typical Use of 1-3 Cylinders Per HPU
350 to 450 Tons Splitting Force
Typical Projects: 2-500 CY
Construction Excavation / Heavy Trenching / Reinforced Concrete Demolition / Boulder Reduction
Darda C10S
Normal / Short Wedgeset Options
1-5/8" x 23" / 25" Minimum Depth Holes
72# Typical Operating Weight
7,250 PSI Operating Pressure
Runs Off NRCDES Hydraulic Power Units
Typical Use of 1-5 Cylinders Per HPU
240 to 285 Tons Splitting Force
Dimensional Stone / Boulder Reduction
Darda C9
Normal / Long Wedgeset Options
1-3/4" x 17" / 23" Minimum Depth Holes
50# Typical Operating Weight
7,250 PSI Operating Pressure
Runs Off NRCDES Hydraulic Power Units
Typical Use of 1-2 Cylinders Per HPU
220 Tons Splitting Force
Light Concrete Demolition / Softer Rock
Tunneling / Pipe Jacking
Darda C4E
Normal / Long Wedgeset Options
1-3/8" x 17" / 22" Minimum Depth Holes
47# Typical Operating Weight
7,250 PSI Operating Pressure
Runs Off NRCDES Hydraulic Power Units
Typical Use of 1-2 Cylinders Per HPU
210 to 250 Tons Splitting Force
Dimensional Stone / Boulder Reduction
Tunneling / Mineral Extraction
Hardscaping / Plain Concrete / Lawns
Darda C2S
1-1/4" x 11" Minimum Depth Holes
38# Typical Operating Weight
7,250 PSI Operating Pressure
Runs Off NRCDES Hydraulic Power Units
Typical Use of 1 Cylinder Per HPU
210 Tons Splitting Force
Hardscaping / Plain Concrete / Lawns
Rock Drill Attachments
Full Hydraulic
Fully Hydraulic Models
For C12s & C20s
WORD Base Unit
Doofor Hydraulic Drifters
Custom Improvements & Systems
Installation, Training, & Support
185+ CFM Compressor Required
Carriers Typically 35,000lb +
Hydraulic / Pneumatic
Hydraulic With Pneumatic Percussion
For C12s & C20s
WORD Base Unit
Wolf-Produced VL120 Drifter
Custom Improvements & Systems
Installation, Training, & Support
375+ CFM Compressor Required
Carriers Typically 18,000lb +
Full Pneumatic
Custom Solutions
For All Handheld Models
Completely Pneumatic -
No Hydraulics or Case Drains Required
185+ CFM Compressor Required
Carriers Typically 6,000lb - 24,000lb
HPUS & Support Equipment
Hydraulic Power Units
Air, Gas, or Electric Power Heads
Change between power heads in minutes
Roll Cage or Base Models Available
Standard 30FT Supply & Return Hoses
7,250 PSI Operating Pressure
5-Gallon Reservoir
External Dump Valve; Easy to Adjust
Robust Design; Extreme Longevity of Pump
Delivers 71 Cubic Inches / Minute at 7,000 PSI
Rock Rippers
Custom Rock Rippers for 2 - 20 Ton Machines
Optimal Angles for Prying Rock Apart
Replaceable Tooth
Oversize Shank
Consumables
We supply all consumables and spare parts for all the product lines we carry!
Contact our office for support, consumables, & spare parts!
Concrete Demolition Processors
Darda CC260
Carriers: ~1.5 Tons
Jaw Opening: 10 in
Crushing Force: 49,000lb
Rebar Diameter: 1/2 in
Tool Weight: 160 Pounds
Darda CC340
Carriers: 1.75 - 3 Tons
Jaw Opening: 14 in
Crushing Force: 81,000lb
Rebar Diameter: 1.125 in
Tool Weight: 330 Pounds
Darda CC440
Carriers: 2.75 - 5 Tons
Jaw Opening: 17 in
Crushing Force: 97,000lb
Rebar Diameter: 1.125 in
Tool Weight: 520 Pounds
Darda CC480
Carriers: 4.5 - 6.5 Tons
Jaw Opening: 18 in
Crushing Force: 110,000lb
Rebar Diameter: 1.125 in
Tool Weight: 610 Pounds
Darda CC580
Carriers: 6 - 10 Tons
Jaw Opening: 22 in
Crushing Force: 119,000lb
Rebar Diameter: 1.125 in
Tool Weight: 790 Pounds
Darda CC700
Carriers: 7.5 - 17 Tons
Jaw Opening: 26 in
Crushing Force: 153,000lb
Rebar Diameter: 1.125 in
Tool Weight: 1,180 Pounds
MultiCutters - Metals / Cable
MC200
Carriers: 1.25 - 3 Tons
Jaw Opening: 8 in
Cutting Force: 110,200lb
Tool Weight: 325 Pounds
MC300
Carriers: 2.5 - 10 Tons
Jaw Opening: 14 in
Cutting Force: 132,300lb
Tool Weight: 685 Pounds
MC300 Cable Cutter
Carriers: 2.5 - 10 Tons
Jaw Opening: 14 in
Cutting Force: 132,300lb
Tool Weight: 685 Pounds
Steel Shears
CC440S
Carriers: 3.25 - 6.5 Tons
Jaw Opening: 6 in
Cutting Force: 90,000 / 166,000 lb
Tool Weight: 610 Pounds
CC700S
Carriers: 7.5 - 17 Tons
Jaw Opening: 11 in
Cutting Force: 145,000 / 410,000 lb
Tool Weight: 1,380 Pounds
Tank Cutter
TC120
Carriers: 3 - 9 Tons
Jaw Opening: 5 in
Cutting Force: 132,300 lb
Tool Weight: 600 Pounds
Support Equipment
Parts & Consumables
We supply all consumables and spare parts for all the product lines we carry!
Contact our office for support, consumables, & spare parts!
Rotary Drives
Certain models are offered with and without hydraulic rotators. Contact us for details.
Attachment Plates
We can custom fabricate attachment plates for a complete turnkey attachment solution.
We confidently combine the best products available with our experience
in applications to deliver the best solutions to hard rock excavation, drilling,
and specialized demolition. We're here to support you with applications and
systems support to keep your project on schedule and maximize the services
that you deliver to your customers.
Rentals - Sales - Consulting - Support
